How To Use The Pull Tab Applicator (iPhone Duo)
1. Before you start, please find the green plastic pin in the little paper pouch with the sapphire screen protector, this pin goes into the hole on the guiding film, the sapphire protector only needs one pin. Identify the alignment holes on the guiding film and the matching pin on the applicator.
2. Clean your phone screen thoroughly with the lens wipe. Then use the large dust-removal sticker to remove any remaining dust or particles.
3. Take the applicator and push the slider to the top. Assemble the setup and inspect if it’s the same as shown in the video. you can take your time at this step, no need to worry about dust specs falling on the screen.
How to install the Free TPU inner display protector
We included a free gift for your iPhone Duo, a TPU protector for the inner display, the best part is that it works with the applicator as well. The principle of installation is pretty similar, except we used silicon stings for some elasticity. Please check the video below for more details.
How To Use The Pull Tab Applicator (iPhone 18 Series)
💡Understand the applicator before cleaning your screen.
1. Check Before You Start
Place your phone into the cutout of the applicator to familiarize yourself with how everything fits together.
Identify the alignment holes on the guiding film and the matching pins on the applicator.
Then check the orientation of the screen protector. When correctly positioned, the pull tab should be underneath the screen protector.
The alignment holes are designed to prevent incorrect installation. If the guiding film does not fit easily onto the applicator, do not force it. Double-check the direction of the screen protector.
----------------------------
2. Clean Your Screen
Clean your phone screen thoroughly with the lens wipe.
Then use the large dust-removal sticker to remove any remaining dust or particles.
4. Install the Protector
Once everything is correctly aligned, pull out the pull tab completely, this will remove all the dust specs on the screen.
Then slowly slide the orange bar from the top to the bottom. You will feel some resistance as the bar moves. This is normal. Continue sliding until the bar reaches the bottom, then slide the orange bar back to the top.
How to install a sapphire screen protector
This method minimizes the risk of mistakes, you will be able to fix most of the issues without stress.
The Quick Method
This method is quick, but it can be tricky if any dust particles get beneath the screen protector accidentally.
